Engineering, 09.12.2019 23:31, jada741

Humid air is enclosed in a 2.00 -liter flask at 40.0 °c. the flask is slowly cooled. when the temperature reaches 20.0 °c, drops of moisture become visible on the flask wall. although the pressure in the flask changes when the temperature drops, it remains close enough to 1 atm for the psychrometric chart to provide a close representation of the behavior of the system throughout the process. use a psychrometric chart to solve the following problems. i.) humid air propertieswhat were the relative humidity, absolute humidity, and wet-bulb temperature of the air at 40.0 °c? relative humidity: %absolute humidity: kg h2o/kg dry airwet-bulb temperature: °cii.) masscalculate the mass of dry air in the flask. gcalculate the mass of water in the flask. giii.) enthalpy change

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

Engineering, 04.07.2019 18:20, cdyshaylia55

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

continue

Engineering, 04.07.2019 19:10, Lexi5170

A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b. s. and b. s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.

Answers: 3

continue

Do you know the correct answer?

Humid air is enclosed in a 2.00 -liter flask at 40.0 °c. the flask is slowly cooled. when the temper...