Engineering, 07.12.2019 05:31, prettyswagg63oz3tyz

Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 mpa and 65°c and leaves the tubes at 6 mpa and 450°c with a velocity of 80 m/s. calculate the velocity of the water at the tube inlet and the inlet volume flow rate. the specific volumes of water at the inlet and exit are 0.001017 m3/kg and 0.05217 m3/kg.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

Engineering, 04.07.2019 19:20, ameliaxbowen7

List 3 options on how to reduce knocking problens during engine process,

Answers: 2

continue

Do you know the correct answer?

Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 mpa and 65°c and leaves the...