The correct statement about the relation between the shear stress (force) at the surface for laminar and turbulent flow over a flat plate is. o the laminar shear stress is greater because the fluid viscosity is not important in turbulent flow o the turbulent shear stress is greater because the mixing dissipates more energy, producing a greater stress at the wall o the laminar and turbulent shear stresses are equal at the same position (x) along the plate, but since turbulence occurs farther down the plate it produces a higher shear stress the laminar shear stress is less because the boundary is thinner in the laminar regime.

Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w