Engineering, 06.12.2019 01:31, butterscotchsjoqsvoz

Aspeed-reducer gearbox containing a compound reverted gear train transmits 45 horsepower with an input speed of 1200 rev/min. spur gears with 20◦ pressure angle are used, with 16 teeth on each of the small gears and 48 teeth on each of the larger gears. a diametral pitch of 10 teeth/in is proposed.
(a) determine the speeds of the intermediate and output shafts.
(b) determine the pitch line velocities (in ft/min) for each set of gears.
(c) determine the magnitudes of the tangential, radial, and total forces transmitted between each set of gears.
(d) determine the input torque.
(e) determine the output torque, neglecting frictional losses.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, jadeochoa4466

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, michellerosas

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

continue

Do you know the correct answer?

Aspeed-reducer gearbox containing a compound reverted gear train transmits 45 horsepower with an inp...