Engineering, 05.12.2019 19:31, Drax152

In the production of long 0.2 cm x 0.2 cm square polymer rods, small amounts of monomer residue are distributed throughout the rods in a concentration of 10-4 mol/cm3 . this trace residue is to be removed by extraction with a solvent in an agitated bath in which the external mass transfer coefficient is high enough that it can be considered to be effectively infinite. if the diffusion coefficient of the monomer in the rod is 10-5 cm 2 /s, evaluate the time required to reduce the concentration of the monomer along the center line of the rod to (a) 50 percent, (b) 1 percent of its initial value.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, nandalabella06

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

Do you know the correct answer?

In the production of long 0.2 cm x 0.2 cm square polymer rods, small amounts of monomer residue are...