Engineering, 05.12.2019 04:31, jakhunter354
Afatigue test was conducted in which the mean stress was 46.2 mpa and the stress amplitude was 219 mpa.
(a) calculate the maximum stress level (in mpa).
(b) calculate the minimum stress level (in mpa).
(c) calculate the stress ratio.
(d) calculate the magnitude of the stress range (in mpa).
Answers: 1
Engineering, 04.07.2019 18:10, ashleybaber4966
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10, koolgurl2003
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Afatigue test was conducted in which the mean stress was 46.2 mpa and the stress amplitude was 219 m...
Physics, 05.02.2020 12:58
Health, 05.02.2020 12:58
Mathematics, 05.02.2020 12:58
Physics, 05.02.2020 12:58