Engineering
Engineering, 05.12.2019 04:31, haleysmith3456

Ahousehold refrigerator that has a power input of 200 w and a cop of 1.3 is to cool 7 cucumbers, 0.3 kg each, to 9 °c. if the cucumbers are initially at 25°c, determine how long it will take for the refrigerator to cool them. the cucumbers can be treated as water whose specific heat is 4.2 kj/kg-°c. a. draw a schematic representation of the system with all the energy interactions involved. (3pts) b. calculate the amount of heat that needs to be removed from the cucumbers, in kl. (hint: use the specific heat) (3 pts) c. calculate the heat rejection rate (qh) of the refrigerator. (3 pts) d. calculate the time required to cool the cucumbers at the desired temperature.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, chadatkin
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
image
Engineering, 04.07.2019 19:10, gabrielaperezcz
Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?
Answers: 3
image
Engineering, 04.07.2019 19:20, GusGus11
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
Do you know the correct answer?
Ahousehold refrigerator that has a power input of 200 w and a cop of 1.3 is to cool 7 cucumbers, 0.3...

Questions in other subjects:

Konu
Spanish, 29.10.2020 07:20
Konu
History, 29.10.2020 07:20