Engineering, 05.12.2019 03:31, QueenNerdy889

Avapor mixture of n-butane (b) and n-hexane (h) contains 50.0 mole% butane at 120 °c and 1 atm. a stream of this mixture flowing at a rate of 150.0 l/s is cooled and compressed, causing some but not all of the vapor to condense. (treat this process as a single-unit operation.) liquid and vapor product streams emerge from the process in equilibrium at t (°c) and 1100 mmhg. the vapor product contains 60.0 mole% butane. determine: a)the required final temperature (t) b)the composition of the liquid product (component mole fractions) c)the molar flow rates of the liquid and vapor products.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Engineering, 04.07.2019 18:20, rhussein6452

Wiy doeres rere okhn a pump whon working betwon the same pressure range?

Answers: 2

continue

Do you know the correct answer?

Avapor mixture of n-butane (b) and n-hexane (h) contains 50.0 mole% butane at 120 °c and 1 atm. a st...