Engineering, 04.12.2019 01:31, VETORRES

Acomposite with 66 percent kevlar fibers in epoxy (tensile strength of kevlar 49 is 0.550 x 106 psi and that of epoxy resin is 11.0 x103 psi ) is strained. if the kevlar 49 fibers have a tensile modulus of elasticity of 27.5 x 106 psi and the epoxy matrix a tensile modulus of elasticity of 0.550 x 106 psi what fraction of the load is carried by the kevlar 49 fibers

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Do you know the correct answer?

Acomposite with 66 percent kevlar fibers in epoxy (tensile strength of kevlar 49 is 0.550 x 106 psi...