Engineering, 03.12.2019 23:31, Aliciaonfleek
As presented in sec 5.4 bending of a cantilever of narrow section, one form of plane-stress elasticity solutions for the displacements of a cantilever beam of rectangular cross section b×2k and length l, loaded at the end by a horizontal force p, a vertical force vo and a bending moment mo as well as undergone a temperature change of t is ea 6ei ea 6ei 2ei 2 where a = 2bh . 1: --bh3. e. vand α are the cross-sectional area, moment of inertia of the cross section about the n. a., young's modulus, poisson's ratio and linear coefficient of thermal expansion, respectively a. pl-gpi-ε conversion. convert the pl-o displacement field into the ple case b. stresses. without detailed derivations. 1ntuitively justify 1f the elasticity stress solutions for pl-σ and pl_ε cases are the same. why or why not note: symbolic math software may be to simplify/deduce the algebraic expressions in part a. if you use symbolic math, be sure to include the program codes and results in your submission
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10, Larkinlover703
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Do you know the correct answer?
As presented in sec 5.4 bending of a cantilever of narrow section, one form of plane-stress elastici...
Questions in other subjects:
Mathematics, 10.12.2020 18:30
Mathematics, 10.12.2020 18:30
Mathematics, 10.12.2020 18:30
