Consider the rc circuit shown in figure 3. assume a pulse source as shown in figure 2 with ton = 100 microsecond, and von = 1 volt. derive an expression for the current i(t) flowing clockwise in the single loop circuit. obtain expressions for the voltages across the resistor and the capacitor (in the direction of assumed current flow). write the matlab code to plot these two voltages in a single plot as functions of time from 0 to 2 ton.

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor