Engineering, 03.12.2019 22:31, nourmaali
The allowable bending stress is ơallow-24 ksi and the allowable shear stress is tallow-14 ksi 10 kip 5 kip/ft 4 ft 6 ft 4 ft select the lightest-weight wide-flange beam that will safely support the loading. use the following chart for reference. wide-flange sections or w shapes fps units flange x-x axis -yaxis web thickness width thickness area depth designation in x lb/ft w16 x 57 w16 x 50 w16 x 45 w16 x 36 w16 x 31 w12 x 45 w12 x 26 w12 x 2 in. 0.715 0.630 0.565 0.430 0.440 0.575 0.380 0.425 in. 6.72 6.68 6.65 6.51 in. 16.43 16.26 16.13 15.86 15.88 12.06 12.22 12.31 in, 0.430 0.380 0.345 0.295 0.275 0.335 0.230 0.260 in. 7.120 7.070 7.035 6.985 5.525 8.045 6.490 4.030 in in, 1.60 1.59 1.57 1.52 1.17 1.94 1.51 0.847 758 659 586 448 375 350 204 156 43.1 37.2 32.8 24.5 12.4 50.0 17.3 4.66 12.1 10.5 9.34 7.00 4.49 12.4 5.34 2.31 92.2 14.7 72.7 56.5 47.2 58.1 33.4 25.4 10.6 13.2 7.65 6.48 4.91 w16 x 31 o w16x36 w12 x 2 o w12 x45
Answers: 3
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
The allowable bending stress is ơallow-24 ksi and the allowable shear stress is tallow-14 ksi 10 kip...
German, 01.04.2021 22:20
SAT, 01.04.2021 22:20
Mathematics, 01.04.2021 22:20