Engineering, 03.12.2019 19:31, kody2lewiskl

Aservomechanism position control has the plant transfer function g(s) = 10/s(s + 1)(s + 10)

you are to design a series compensation transfer function dc(s) in the unity feedback configuration to meet the following closed-loop specifications .

the response to a reference step input is to have no more than 16% overshoot. the response to a reference step input is to have a rise time of no more than 0.4 sec.

the steady -state error to a unit ramp at the reference input must be less than 0.05.

(a) design a lead compensation that will cause the system to meet the dynamic response specifications, ignoring the error requirement

(b) what is the velocity constant kv for your design? does meet the error specification?

(c) design a lag compensation to be used in series with the lead you have designed to cause the system to meet the steady-state error specification.

(d) give the matlab plot of the root locus of your final design.

(e) give the matlab response of your final design to a reference step.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:20, maciemarklin79981

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

continue

Engineering, 04.07.2019 18:20, cdyshaylia55

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

continue

Do you know the correct answer?

Aservomechanism position control has the plant transfer function g(s) = 10/s(s + 1)(s + 10)