Engineering, 03.12.2019 03:31, 1thousandwishes
For the electric circuit, given that c1=0.1 microf, c2=0.1 microf, c3=0.3 microf, and c4=0.3 microf and the total voltage drop across capacitors c1 and c2 at t=0 is v1(0)+v2(0)=120v, what is the initial energy stored in the capacitors network, w(t=0, total)?
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 19:20, GusGus11
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
Engineering, 04.07.2019 19:20, diawia
Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?
Answers: 2
Do you know the correct answer?
For the electric circuit, given that c1=0.1 microf, c2=0.1 microf, c3=0.3 microf, and c4=0.3 microf...
Questions in other subjects:
Health, 29.11.2019 00:31
Business, 29.11.2019 00:31
Biology, 29.11.2019 00:31
Mathematics, 29.11.2019 00:31
