Engineering, 03.12.2019 00:31, elainestorm9633

7-42a 0.5-m3 rigid tank contains refrigerant-134a initially at 200 kpa and 40 percent quality. heat is transferred now to the refrigerant from a source at 35°c until the pressure rises to 400 kpa. determine the entropy change of the refrigerant.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 19:10, gabrielaperezcz

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

continue

Engineering, 06.07.2019 02:30, Nonniel0v3

An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?

Answers: 3

continue

Engineering, 06.07.2019 04:30, tiwaribianca475

At flow nozzle is to be installedin a 5-in type k copper tube carrying linseed oil at 77 f. a mercury manometer is to be used to measure the pressure difference across the nozzle when the expected range of the flow rate is from 700 galmin to 1000 gal/min. the manometer scale ranges from 0 to 8.0 in of mercury determine an appropriate diameter of the nozzle.

Answers: 2

continue

Do you know the correct answer?

7-42a 0.5-m3 rigid tank contains refrigerant-134a initially at 200 kpa and 40 percent quality. heat...