Engineering, 02.12.2019 22:31, bougiehairstudios

Problem 4a titanium [e = 16,500 ksi;  = 5.3×10–6/°f] bar (1) and a bronze [e = 15,200 ksi;  = 12.2×10–6/°f] bar (2), each restrained at one end, are fastened at their free ends by a pin of diameter d = 0.4375 in. the length of bar (1) is l1 = 19 in. and its cross-sectional area is a1 = 0.50 in.2. the length of bar (2) is l2 = 27 in. and its cross-sectional area is a2 = 0.65 in.2. what is the average shear stress in the pin at b if the temperature changes by 40°f?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Do you know the correct answer?

Problem 4a titanium [e = 16,500 ksi;  = 5.3×10–6/°f] bar (1) and a bronze [e = 15,200 ksi;  = 12...