Engineering
Engineering, 30.11.2019 05:31, ksa23

Adecision is needed regarding the type of isolator (suspension) to use with a machine that has some unbalance. when placed on an isolator having springs alone, the machine weight causes a 3 mm deflection. when the machine is run at 300 rpn supported on four steel springs both the motion of the machine and force transmitted to the supporting structure are marginally acceptable. a colleague has recommended that the machine be run at a higher speed (500 rpm) and that a different isolator be used. the proposed isolator is defleted by 4 m under static load and has a damping ratio of 0.25. do you concur with the recommendation? justify your response in terms of both machine motion and foe transmitted to the structure.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, Talos02
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
image
Engineering, 04.07.2019 18:10, agpraga23ovv65c
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
image
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Do you know the correct answer?
Adecision is needed regarding the type of isolator (suspension) to use with a machine that has some...

Questions in other subjects: