Engineering
Engineering, 30.11.2019 00:31, himatasy

Aculvert must carry 4.3 m^3/sec. the culvert length will be 30 m with a slope of 0.3%. if the maximum permissible headwater level is 3.6 m above the culvert invert, what size corrugated-pipe culvert (n=0.025) would you select. the outfall will discharge freely. assume a square-edge entrance (ke=0.5).

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
image
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
image
Engineering, 04.07.2019 18:20, krojas015
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
image
Engineering, 06.07.2019 04:10, kathiewallentin1767
Steam enters a converging-diverging nozzle at 1.0 mpa and 500°c with a negligible velocity at a mass flow rate of 2.5 kg/s, and it exits at a pressure of 200 kpa. assuming the flow through the nozzle to be isentropic, determine: the exit area and (a) (b) the exit mach number
Answers: 2
Do you know the correct answer?
Aculvert must carry 4.3 m^3/sec. the culvert length will be 30 m with a slope of 0.3%. if the maximu...

Questions in other subjects:

Konu
Mathematics, 09.03.2021 05:20
Konu
Mathematics, 09.03.2021 05:20
Konu
Mathematics, 09.03.2021 05:20