A) using singularity functions, write a single equation for m(x) along the beam. hint: use the constant ‘w’ for 30 lb/in and ‘ l’ for 120 in.; it will make the algebra in the next couple of parts much easier.
b) find the reactions at a and b.
c) find the deflection of the beam at x=120 in. if it is an s-beam (s24x80 structural steel; e = 29 x 106 psi; i = 2100 in4).

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.