Engineering
Engineering, 28.11.2019 20:31, atkinsonsinbraz

Consider an opaque horizontal plate that is well insulated on its back side. the irradiation on the plate is 2500 w/m2 , of which 500 w/m2 is reflected. the plate is at 227c and has an emissive power of 1200 w/m2 . air at 127c flows over the plate with a heat transfer convection coefficient of 15 w/m2 k. determine the emissivity, absorptivity, and radiosity of the plate. what is the net heat transfer rate per unit area?

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 19:30, 10040813
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
image
Engineering, 04.07.2019 18:20, cristykianpour
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
image
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
image
Engineering, 04.07.2019 19:10, LadyHolmes67
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Do you know the correct answer?
Consider an opaque horizontal plate that is well insulated on its back side. the irradiation on the...

Questions in other subjects:

Konu
Mathematics, 27.05.2021 08:00
Konu
Mathematics, 27.05.2021 08:00