Engineering, 28.11.2019 05:31, lexizamora2

Oil in an engine is being cooled by air in a cross-flow heat exchanger, where both fluids are unmixed. oil (cp = 2000 j/kg. k) flowing with a flow rate of 0.020 kg/s enters the heat exchanger at 75°c, while air (cp = 1000 j/kg. k) enters at 30°c with a flow rate of 0.20 kg/s. the overall heat transfer coefficient of the heat exchanger is 50 w/m2 . k and the total surface area is 1 m2 . determine: (a) the heat transfer effectiveness and (15 points) (b) the outlet temperature of the oil. (use the effectiveness-ntu method) (15 points)

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Do you know the correct answer?

Oil in an engine is being cooled by air in a cross-flow heat exchanger, where both fluids are unmixe...