Engineering
Engineering, 28.11.2019 02:31, shyterria1329

Fish and wildlife managers have determined that a sudden temperature increase greater than 5°c would be harmful to the marine ecosystem of a river. warmer waters contain less dissolved oxygen and cause organisms in a river to increase their metabolism; if the temperature increase is sudden, the organisms do not have time to adapt to the new environment and likely will die. (changes in river temperatures of five degrees and more due to seasonal temperature variations are common, but those temperature change are gradual.)a proposed chemical plant plans to use river water for process cooling. the river flows at a rate of 15.0 m3/s at a temperature of 15°c, and a fraction of it will be diverted to the plant. preliminary calculations reveal that the cooling water will remove 5.00×105kj/s of heat from the plant. a portion of the extracted water will evaporate from the plant into the atmosphere, and the remainder will be returned to the river at a temperature of 35°c.(a) draw and completely label a flowchart of the process and prove there is enough information available to calculate all of the unknown stream flow rates on the chart.(b) estimate the fraction of the river flow that must be diverted to the plant and the percentage of the cooling water that evaporates. assume that water has a constant heat capacity of 4.19 kj/(kg°c) and a heat of vaporization roughly that of water at normal boiling point, and also assume that the specific enthalpy of the water vapor relative to liquid water at 15°c equals the heat of vaporization.(c)write (but don’t evaluate) an expression for the enthalpy change neglected by the assumption about the specific enthalpy of the steam.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
image
Engineering, 04.07.2019 18:10, ayoismeisjjjjuan
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
image
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Do you know the correct answer?
Fish and wildlife managers have determined that a sudden temperature increase greater than 5°c would...

Questions in other subjects:

Konu
History, 06.10.2021 07:20
Konu
Mathematics, 06.10.2021 07:20
Konu
Mathematics, 06.10.2021 07:20