Engineering
Engineering, 28.11.2019 00:31, Jilly8874

Alockheed f-104 supersonic fighter has a wing with a thin symmetric airfoil with a thickness ratio of 3.6 %. consider this airfoil in a flow at an angle of attack of 70. if the lift coefficient for incompressible flow, i. e., m < 0.3, is given by the following expression, cl = 2, where  is the angle of attack in radians, determine the lift coefficient for the wing of the f-104. if the lift coefficient for the wing in transonic flow, i. e. 0.3 < m < 0.9, is 0.9 and based on the incompressible value determined above, determine the exact mach number of the flow. if the lift coefficient for the wing in supersonic flow, i. e., 1.1 < m < 5.0, is 0.3 , determine the exact mach number of the flow.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
image
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
image
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Do you know the correct answer?
Alockheed f-104 supersonic fighter has a wing with a thin symmetric airfoil with a thickness ratio o...

Questions in other subjects: