Engineering, 28.11.2019 00:31, Cinders13

Verify that the line integral and the surface integral of stokes' theorem are equal for the following vector field, surface s, and closed curve c. assume that c has counterclockwise orientation and s has a consistent orientation. fequalsleft angle y comma font size decreased by 6 minus x comma font size decreased by 6 7 right angle; s is the upper half of the sphere x squaredplusy squaredplusz squaredequals4 and c is the circle x squaredplusy squaredequals4 in the xy-plane. construct the line integral of stokes' theorem using the parameterization r(t)equalsleft angle 2 cosine t comma font size decreased by 6 2 sine t comma font size decreased by 6 0 right angle, for 0less than or equalstless than or equals2pi for the curve c. choose the correct answer below. a. integral from 0 to 2 pi 4 font size decreased by 6 dt b. integral from 0 to 2 pi minus 4 font size decreased by 6 dt c. integral from 0 to 2 pi 8 font size decreased by 6 dt d. integral from 0 to 2 pi minus 8 font size decreased by 6 dt

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, lillygrl100

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

continue

Engineering, 04.07.2019 18:10, wyattlb97

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Do you know the correct answer?

Verify that the line integral and the surface integral of stokes' theorem are equal for the followin...