Engineering, 28.11.2019 00:31, emely1139

The cooling water from the condenser of a power plant enters a wet cooling tower at 40c at a rate of 90 kg/s. the water is cooled to 25c in the cooling tower by air that enters the tower at 1 atm, 23c and 60% relative humidity and leaves as saturated at 32c. neglecting the power input to the fan, determine (a) the volume flow rate of air into the cooling tower (b) the mass flow rate of the required make-up water.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:20, CelesteN64

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

continue

Do you know the correct answer?

The cooling water from the condenser of a power plant enters a wet cooling tower at 40c at a rate of...