Engineering, 27.11.2019 23:31, sayedaly2096

On a clear summer afternoon with a wind speed of 3.20 m/s at 10 m, the particulate concentration was found to be 1,520 µg/m3 at a point 2 km downwind and 0.5 km perpendicular to the plume centerline from a coal-fired power plant in a rural area. if the effective stack height is 95 m, determine the particulate emission rate of the power plant. use the graphical method to calculate sy and sz.
stack parameters height: 75.0 m diameter: 1.5 m exit velocity: 12.0 m/s temp: 322 c
atmospheric conditions pressure: 100 kpa temp: 28 c

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Engineering, 04.07.2019 18:10, namira16

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

continue

Do you know the correct answer?

On a clear summer afternoon with a wind speed of 3.20 m/s at 10 m, the particulate concentration was...