Engineering, 27.11.2019 21:31, StephenCurry34
Acar is traveling up a 3% grade, with the speed of 85mph, on a road that has good, wet pavement. the radius of the wheels is 15 inches, the driveline slippage is 3%, and the overall gear reduction ratio is 2.5 to 1. a deer jumps out onto the road and the driver applies the brakes 290-ft from it. the driver hits the deer at a speed of 20mph. if the driver did not have antilock brakes, and the wheels were locked the entire distance, would a deer-impact speed of 20mph be possible? (hint: check the braking efficiency) [use theoretical stopping distance]
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10, genyjoannerubiera
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Do you know the correct answer?
Acar is traveling up a 3% grade, with the speed of 85mph, on a road that has good, wet pavement. the...
Questions in other subjects:
SAT, 04.02.2021 14:40
Physics, 04.02.2021 14:40
English, 04.02.2021 14:40
Biology, 04.02.2021 14:40
