Engineering
Engineering, 27.11.2019 00:31, naomicervero

Abioreactor is running at steady state. it was determined that under this condition, ka = 15/β„Ž. when air is pumped into the bioreactor, a yeast can be grown with, qa = 5 mmol/g. h. the critical dissolved oxygen concentration = 0.3 mg/l (the lowest cl for the yeast to grow). the oxygen solubility for the culture running in the bioreactor is 9 mg/l. what is the maximum concentration of the yeast this bioreactor can achieve? what is the maximum concentration when pure oxygen is used for running the bioreactor? (35 points)

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
image
Engineering, 04.07.2019 18:20, karatsgrande3772
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10Γ€1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
image
Engineering, 04.07.2019 19:10, Destinationz
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in Β°c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
image
Engineering, 04.07.2019 19:10, phantomlizz3233
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
Do you know the correct answer?
Abioreactor is running at steady state. it was determined that under this condition, ka = 15/β„Ž. when...

Questions in other subjects: