Engineering
Engineering, 27.11.2019 00:31, maxy7347go

Acombined gas-steam power cycle uses a simple gas turbine for the topping cycle and simple rankine cycle for the bottoming cycle. for the topping cycle, air enters to the compressor at the temperature of 293 k and experiences a compression ratio of 8 with efficiency of 0.85. the temperature of air after the combustion reaches to a maximum of 1100degree c. the air experiences an expansion ratio of 8 with efficiency of 0.9 in the turbine. the air at the outlet of turbine flows through a heat exchanger to transport thermal energy to the bottoming cycle and leaves at a temperature corresponding to water saturation temperature at 6 mpa. for the bottoming cycle, water enters in the saturated state at pressure of 20 kpa to an ideal pump. the vapor at the inlet of turbine is at 320degree c and 6 mpa. the vapor goes through a turbine with isentropic efficiency of 0.9. the properties of air at room temperature are c_p = 1.005 kj/kg-k and k= 1.4 show the t-s diagram of this combined cycle. determine the net work of the topping and bottoming cycles. determine the mass flow rate of ah' for a power output of 100 mw.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
image
Engineering, 04.07.2019 18:20, CelesteN64
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
image
Engineering, 04.07.2019 18:20, sanchez626
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
image
Engineering, 04.07.2019 19:10, LadyHolmes67
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Do you know the correct answer?
Acombined gas-steam power cycle uses a simple gas turbine for the topping cycle and simple rankine c...

Questions in other subjects:

Konu
Mathematics, 05.01.2022 23:20
Konu
Mathematics, 05.01.2022 23:20