Engineering
Engineering, 26.11.2019 21:31, cool8844

Design a single-column footing (including dowels) to support an 11 in. square column reinforced with eight no. 9 (no. 29) bars centered 2.5 in. from the column faces (equal number of bars on each face). the un-factored axial dead load 135 kips, and the un-factored axial live load 125 kips. for the column, fc= 4000 psi and fy= 60,000 psi. the base of the footing will be 3ft below grade. the allowable soil bearing pressure is 3000 lb/ft2. material strengths for the footing are pc= 3000 psi and fy= 60,000 psi.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, lillygrl100
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
image
Engineering, 04.07.2019 18:10, aliopqwas
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
image
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
image
Engineering, 04.07.2019 18:20, 21megoplin
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Do you know the correct answer?
Design a single-column footing (including dowels) to support an 11 in. square column reinforced with...

Questions in other subjects: