Engineering, 26.11.2019 17:31, cutiecat66
A40 wt% pb–60 wt% mg alloy is heated to a temperature within the α + liquid-phase region. if the mass fraction of each phase is 0.5, then estimate:
(a) the temperature of the alloy
(b) the compositions of the two phases in weight percent
(c) the compositions of the two phases in atom percent
Answers: 3
Engineering, 04.07.2019 18:10, tjeffers90028
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
A40 wt% pb–60 wt% mg alloy is heated to a temperature within the α + liquid-phase region. if the mas...
Mathematics, 13.11.2020 07:30
Mathematics, 13.11.2020 07:30
History, 13.11.2020 07:30
Mathematics, 13.11.2020 07:30