Engineering, 26.11.2019 06:31, stuckonquestions

A4-pole, 60hz, y-connected, 3-phase generator has a regulated line voltage
of vab = 450∠30° vrms, a synchronous reactance of 0.05-ω, a stator resistance of 0.003ω,
and lsf = 0.018 h. the balanced 3-phase load draws 3 mw at a lagging 0.75 power
factor.
a. compute the 3-phase complex power of the load (magnitude and angle).
s3p =
b. compute the generator phase current (magnitude and angle; hint: the angle of the
current should be negative for the load to have a lagging power factor).
ias =
c. find the required excitation voltage.
ea =
d. calculate the required field current.
if =
e. state the required speed of the prime mover (rpm) nm =

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Do you know the correct answer?

A4-pole, 60hz, y-connected, 3-phase generator has a regulated line voltage
of vab = 450∠30° vr...