Engineering, 26.11.2019 06:31, danielle413

Reservoir a delivers to reservoir b through two uniform pipelines aj and jb of diameters 300mm and 200mm, respectively. just upstream of the change in section, which is assumed gradual, controlled discharge of 30 l/s is taken off. length of aj = 3000 m; length of jb = 4000 m; effective roughness size of both pipes =0.015 mm; h = 25.0 m. determine the discharge to b, neglecting the loss at j.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Engineering, 04.07.2019 18:20, annette211pdd8v9

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

continue

Do you know the correct answer?

Reservoir a delivers to reservoir b through two uniform pipelines aj and jb of diameters 300mm and 2...