Aplant manager is concerned her equipment may need recalibrating. it seems that the actual weight of the 15 oz. cereal boxes it fills has been fluctuating. the standard deviation should be at most 0.5 oz. in order to determine if the machine needs to be recalibrated, 88 randomly selected boxes of cereal from the next day's production were weighed. the standard deviation of the 88 boxes was 0.52. does the machine need to be recalibrated? conduct a hypothesis test at the 5% level.

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.