Engineering
Engineering, 26.11.2019 02:31, paiged55

The mass fraction of eutectoid cementite in a hypereutectoid iron-carbon alloy (just below its eutectoid temperature) is 0.107.on the basis of this information, determine the composition of the alloy.

if it is not possible to determine the composition from the information provided, enter 0.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
image
Engineering, 04.07.2019 18:20, rocio5649
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa. s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
image
Engineering, 06.07.2019 03:20, mpete1234567890
Asimply supported beam abc of length l has ab of length hl and second moment of area / and bc of length hl and second moment of area i2. determine the strain energy stored in the beam when it is subject to a vertical load f at its midpoint and the consequential central deflection.
Answers: 2
image
Engineering, 06.07.2019 03:30, neariah24
Give three differences between corrosion of metals and the corrosion of ceramics? what is static fatigue?
Answers: 1
Do you know the correct answer?
The mass fraction of eutectoid cementite in a hypereutectoid iron-carbon alloy (just below its eutec...

Questions in other subjects:

Konu
Chemistry, 26.06.2020 15:01