Engineering, 26.11.2019 01:31, jimissac68

Briefly describe the simplest heat treatment procedure that would be used in converting a 0.76 wt% c steel from one microstructure to the other, as follows: (a)spheroidite to tempered martensite (b)tempered martensite to pearlite (c)bainite to martensite (d)martensite to pearlite (e)pearlite to tempered martensite (f) tempered martensite to pearlite (g)bainite to tempered martensite (h)tempered martensite to spheroidit

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:20, cdyshaylia55

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

continue

Do you know the correct answer?

Briefly describe the simplest heat treatment procedure that would be used in converting a 0.76 wt% c...