Engineering, 25.11.2019 23:31, NeverEndingCycle

In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75â°c as it moves at 0.19 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter. a uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the tube. if the tube is 10 m long, what is the required heat flux? if fluid enters the tube with a fully developed velocity profile and a uniform temperature profile, what is the surface temperature at the tube exit? fluid properties may be approximated as 1000 kg/m3, 4000 j/kgâ·k, 2 ã 10-3 kg/sâ·m, 0.8 w/mâ·k, and 10.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:20, annette211pdd8v9

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

continue

Engineering, 04.07.2019 18:20, sanchez626

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

continue

Do you know the correct answer?

In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75â°c as...