Engineering
Engineering, 25.11.2019 21:31, littleprinces

Aerobic pond is used as a secondary wastewater treatment operation for small communities. the pond is usually shallow enough so that it can be assumed as a well-mixed aerobic reactor. the inflow rate of wastewater entering a 200m^3-aerobic pond is 50 m^3/d and has a substrate (so) concentration of 95 mg bod5/l. the microbe concentration (xo) in the influent is small and can be neglected. the microbial growth and substrate consumption in the pond can be described by the monod equations:
a. assuming the pond is in steady state, write mass balance equation for the microorganism concentration (x) and solve the equation to derive an expression for the substrate (s) concentration as a function of the hydraulic detention time. calculate s using the equation you derived. (ks=60 mgbod5/l, y=0.6 mg vss/mg bod5, k_d=0.06 day-1, mu_m=3 day-1)
b. write the mass balance equation for the substrate in the pond and solve it for the microbe concentration (x) as a function of the substrate concentration and hydraulic detention time. calculate x using the equation you derived.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, 19deleonl
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
image
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, aaliyah80
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Do you know the correct answer?
Aerobic pond is used as a secondary wastewater treatment operation for small communities. the pond i...

Questions in other subjects:

Konu
Mathematics, 18.01.2021 20:50
Konu
Arts, 18.01.2021 20:50
Konu
Biology, 18.01.2021 20:50