Engineering, 23.11.2019 05:31, dbhuggybearow6jng

Athick-walled tube of stainless steel having a k = 21.63 w/m∙k with dimensions of 0.0254 m id and 0.0508 m od is covered with 0.0254 m thick layer of an insulation (k = 0.2423 w/m∙k). the inside-wall temperature of the pipe is 811 k and the outside surface of the insulation is 310.8 k. for a 0.305 m length of pipe, calculate the heat loss and the temperature at the interface between the metal and the insulation.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:10, nbug2121

Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]

Answers: 3

continue

Engineering, 06.07.2019 05:10, allenpaietonp9v8sv

Air undergoes a constant pressure cooling process with no moisture added or removed. the air originally exists at 45 °c, 150 kpa and 35 % relative humidity. it is cooled until the temperature reaches 29 oc. determine (a) the relative humidity of the cooled air. (b) the dew point temperature of the cooled air in °c. (c) the heat removed during the cooling process in kj/kg. use the psychrometric chart to check your answers (this part will not be graded; however, it will you get comfortable using the psychrometric chart)

Answers: 3

continue

Engineering, 10.07.2019 21:30, kelseybell2707

Iwould like to speak to a live person. i cant make my payment.

Answers: 2

continue

Engineering, 11.07.2019 00:40, annafellows

Alow-carbon steel was found to follow o= (717 mpa)e^0.234. if the initial diameter was 12.8 mm and was reached duing the tensile test of this steel. 4, the diameter at fracture was 9.27 mm, calculate the maximum tensile load (kn) that during the tensile test of this steel.

Answers: 2

continue

Do you know the correct answer?

Athick-walled tube of stainless steel having a k = 21.63 w/m∙k with dimensions of 0.0254 m id and 0....