Engineering, 23.11.2019 04:31, xoxo4849
An experimentalist has measured the u-velocity component of a steady, two-dimensional flow field. it is approximated by = 3xy + x + 10 it is also known that the v-velocity is zero along the line y=0.
a) (3 points) find an expression for the v-velocity in the entire field
b) (3 points) find an expression for the streamfunction, , for this flow
c) (4 points)determine the location of any stagnation points in the flow (stagnation means vr=0)
d) calculate the acceleration field (ax and ay) for this flow field.
Answers: 2
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
An experimentalist has measured the u-velocity component of a steady, two-dimensional flow field. it...
English, 21.01.2021 18:00
Social Studies, 21.01.2021 18:00
Mathematics, 21.01.2021 18:00
Mathematics, 21.01.2021 18:00
Mathematics, 21.01.2021 18:00
Mathematics, 21.01.2021 18:00
Geography, 21.01.2021 18:00