Engineering, 23.11.2019 03:31, daniii000
Consider laminar, fully developed flow in a channel of constant surface temperature ts. for a given mass flow rate and channel length, determine which rectangular channel, b/a = 1.0, 1.43, or 2.0, will provide the highest heat transfer rate. is this heat transfer rate greater than, equal to, or less than the heat transfer rate associated with a circular tube?b/a=2
Answers: 1
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10, jesuslovesusall3
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Consider laminar, fully developed flow in a channel of constant surface temperature ts. for a given...
History, 28.06.2019 04:30