Engineering, 23.11.2019 03:31, ogjigglypuff

Consider the velocity and temperature profiles for air- flow in a tube with diameter of 8 cm can be expressed as 11(r) = 0.21(1-(r/r)21 tr) = 250 + 200( r/r)3 with units in m/s and k, respectively. if the convection heat transfer coefficient is 100 w/m2.k, determine the mass flow rate and surface heat flux using the given velocity and tem- perature profiles. evaluate the air properties at 20°c and 1 atm. properties the density of 1 atm air at 20°c is p-1.204 kg/m

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 04.07.2019 18:20, dlr1628

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

continue

Engineering, 04.07.2019 18:20, sanchez626

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

continue

Do you know the correct answer?

Consider the velocity and temperature profiles for air- flow in a tube with diameter of 8 cm can be...