Engineering, 23.11.2019 02:31, batmanmarie2004
G(s) = k(s + 6) /(s + 2)(s + 3)(s + 5) the system is operating with a dominant pole damping ratio of 0.707. design a pd con- troller so that the settling time is reduced by a factor of 2. in the process of doing the design, prepare two hand sketches of the root locus - the first for the uncompensated system and the second for the system with the pd controller. in drawing these hand sketches, show the asymptotes and centroid of the root locus. (for numerical details of break-away/break-in points, j! -axis crossings and other intersection points, use matlab).
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10, danksans7011
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Do you know the correct answer?
G(s) = k(s + 6) /(s + 2)(s + 3)(s + 5) the system is operating with a dominant pole damping ratio of...
Questions in other subjects:
