Engineering, 22.11.2019 23:31, briarkaltvedt

The boeing 787 dreamliner is designed to be 20% more fuel efficient than the comparable boeing 767 and flies at an average cruise speed of mach 0.85. the midsize boeing 767 has a range of 12,000 km, a fuel capacity of 90,000 l, and flies at mach 0.80. assume the speed of sound is 700 mph, and calculate the projected volumetric flow rate of fuel for each of the two dreamliner engines in m3/s. (25 pts)
(a) assume that the fuel lines for each engine in the boeing dreamliner are 7/8 inches in diameter and that the density and viscosity of jet fuel are 800 kg/m3 and 8.0 ∗ 10−3 kg/(m · s), respectively. calculate the average velocity of the fuel in m/s and the reynolds number of this flow. state if the flow is laminar or turbulent.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

Engineering, 04.07.2019 18:20, cxttiemsp021

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

Do you know the correct answer?

The boeing 787 dreamliner is designed to be 20% more fuel efficient than the comparable boeing 767 a...