Engineering, 22.11.2019 05:31, evanlubbe53

For a turning operation, you have selected a high-speed steel (hss) tool and turning a hot rolled free machining steel. your depth of cut will be 0.105 in. the diameter of the workpiece is 1.00 in. a. using a speed of 105 sfpm and a feed of 0.015, calculate the metal removal rate (mrr).

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Engineering, 06.07.2019 03:20, dinapearce1403

Write a technical essay (maximum two pages) about stress concentration. and paste from the textbook. instead, read updated material about this phenomenon and provide a technical evaluation of the different techniques to avoid/reduce such phenomenon. consider in your analysis cutting-edge computational techniques such as fea to study and analyze stress concentrations.

Answers: 2

continue

Engineering, 06.07.2019 04:30, kalithekittenqueen

Mention two examples each of the direct and indirect measurement of force.

Answers: 3

continue

Do you know the correct answer?

For a turning operation, you have selected a high-speed steel (hss) tool and turning a hot rolled fr...