Engineering
Engineering, 22.11.2019 01:31, goawayyounoob21

If we recreated the scene from fast & furious 7 and dropped a challenger srt® hellcat redeye widebody from a c-130 aircraft at 5,280 ft, how much horsepower would it take to drive past it before it hits the ground if you’re 1 mile away?
pro tips
air density @ sea level, 59 degrees, no wind = p = .002377 slugs/ft^3
coefficient of drag (flat plate, nasa) = c(d) = 1.28
weight = w = 4451 lbs
gravitation constant = g = 32.2 ft/sec^2
area = a = 197.5" long x 78.2" wide x (1 ft^2/ 144 in^2)
vehicle falls flat, wheels 1st, straight down, at constant acceleration with no aerodynamic drag until terminal velocity
horsepower needed to accelerate is average - not peak
100% driveline efficiency

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
image
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
image
Engineering, 04.07.2019 18:20, samueltaye
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
image
Engineering, 04.07.2019 19:10, LadyHolmes67
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Do you know the correct answer?
If we recreated the scene from fast & furious 7 and dropped a challenger srt® hellcat redeye wi...

Questions in other subjects:

Konu
History, 30.10.2019 09:31