Engineering, 21.11.2019 18:31, jujurocks10

Consider weather conditions for which the prevailingwind blows past the penthouse tower on a tall building. the tower length in the wind direction is 10 m andthere are 10 window panels. a. calculate the average convection coefficent for the 1st, 3rd, and 10th window panels when the wind speed is 5 m/s. use a film temperature of 300k to evaluate the thermophysical properties required of the correlation. would this be a suitable value of the film temperature for ambient air temperatures in the range of -15°c ≤ t[infinity] ≤ 38°c?

b. for the 1st, 3rd, and 10th windows, on one graph, plot the variation of the average convection coefficients with wind speeds in the range of 5 ≤ u[infinity] ≤ 100 km/h. explain the major features of each curve and their relative magnitudes.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:10, meganwintergirl

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

continue

Engineering, 04.07.2019 18:20, sarah7984

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Do you know the correct answer?

Consider weather conditions for which the prevailingwind blows past the penthouse tower on a tall bu...