Engineering, 21.11.2019 05:31, mahhvelousg97
3. (20 points) an open-loop transfer function is given by g(s)=100(s-1)/(s^2 +25s +100) a) determine the break frequencies for the bode plot. (5 points) b) determine the slope of the asymptotic plot at very low frequencies and at very high frequencies. (5 points) c) sketch the bode magnitude plot by hand. (10 points)
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Do you know the correct answer?
3. (20 points) an open-loop transfer function is given by g(s)=100(s-1)/(s^2 +25s +100) a) determine...
Questions in other subjects:
Geography, 17.11.2019 10:31
