Engineering, 21.11.2019 05:31, zistoe0430

Ametal plate (k = 180 w/m·k, rho = 2800 kg/m^3 , and cp = 880 j/kg·k) with a thickness of 1cm is being cooled by air at 5°c with a convection heat transfer coefficient of 30 w/m2 ·k. if the initial temperature of the plate is 300°c, determine the plate temperature gradient at the surface after 2 minutes of cooling. hint: use the lumped system analysis to calculate the plate surface temperature. make sure to verify the application of this method to this problem

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, selenamr

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed. gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

Engineering, 04.07.2019 18:20, moneywaydaedae

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

continue

Do you know the correct answer?

Ametal plate (k = 180 w/m·k, rho = 2800 kg/m^3 , and cp = 880 j/kg·k) with a thickness of 1cm is bei...