Engineering, 21.11.2019 01:31, zitterkoph

Astudent makes two measurements with the manometer. the first measurement is with 100 mm of water in the tube and the plc displays the digital value in n7: 0 = 978. the second measurement is with 800 mm of water in the tube and the digital value in n7: 0 = 7750. write a one run plc program using the scp command to scale the value in n7: 0 back into mm units and store the answer in n7: 4.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 06.07.2019 04:20, coolstacie

What is the fuid acceleration in vector form for the following velocity field? note i, j, and k are unit vectors. show all of your work.

Answers: 1

continue

Do you know the correct answer?

Astudent makes two measurements with the manometer. the first measurement is with 100 mm of water in...